8 - 8
PN 074-519-P1C
3000 Micro GC Operating Manual
Figure 8-4 Change module configuration
4 Two caution messages appear. Read the caution, then click OK to continue.
5 Click Remove. See Figure 8-5.
Figure 8-5 Decommission a GC module - remove button
NOTE: Once a Standard GC module is decommissioned, it can no longer be used
until it is recommissioned.
6 Click Remove next to the Standard GC module to decommission. A caution
appears. Read the caution, then click OK to decommission the Standard GC
module. See Figure 8-6.
To Next Page
Loading...
