Inficon 3000 Micro GC - Enable the Instrument in EZ IQ

8 - 22
PN 074-519-P1C
3000 Micro GC Operating Manual
Figure 8-28 Commission a standard GC Module - restart instrument countdown
10 Set the 3000 Micro GC front panel power switch to the off position.
8.2.8 Enable the Instrument in EZ IQ
Update EZ IQ with updated 3000 Micro GC hardware configuration after:
 installing the replacement Standard or Performance Enhanced GC module
 updating the GC firmware
For instruction on how to update 3000 Micro GC instrument configuration in EZ IQ,
refer to section 7.2 on page 7-1.