Maintenance 8-4
kina22e chapter 8.fm technical handbook(1206)
4 Depending on the contamination the air filter should be cleaned or replaced as
necessary.
5 Slide in new (cleaned) air filter until fully in contact with dead stop.
6 Close air filter fastener.
7 From the main menu go to HISTORY & MAINTENANCE / CONFIRM MAINTENANCE and
confirm with the appropriate button on the right side of the display that the air filter
has been replaced / cleaned. The actual date and time as well as the actual number
of operating hours will be saved and a reminder to perform this maintenance task
again will be issued after another 10,000 operating hours.
Notice: The Ecotec E3000 must be set to
ADVANCED mode for confirming
maintenance tasks.
Fig. 8-2 Dismounting of the air filter
Fig. 8-3 Inserting the air filter
To Next Page
Loading...
