Inficon Ecotec E3000 530-001 - 1.3.3 Accessories

General Information 1-9
kina22e chapter 1.fm technical handbook(1206)
1.3.3 Accessories
Sniffer line for Ecotec E3000 Cat. No. / Ref. No.
SL3000-3, 3 m length 525-001
SL3000-5, 5 m length 525-002
SL3000-10, 10 m length 525-003
SL3000-15, 15 m length 525-004
Sniffer line for system integration (robot application) 525-015
Sniffer tips
ST 312, 120 mm long, rigid 122 13
FT 312, 120 mm long, flexible 122 14
FT 200, 200 mm long, rigid 122 18
FT 250, 250 mm long, flexible 122 66
ST 385, 385 mm long, rigid 122 15
FT 385, 385 mm long, flexible 122 16
FT 600, 600 mm long, flexible 122 09
ST 500, 500 mm long, rigid, 45° angled 122 72
Water protection tip for sniffer 122 46
Holder for SL3000 sniffer line 525-006
ECO-Check reference leak for R134a 531-001
Calibrated sniffer leaks for single refrigerants, 2 - 5 g/a
(16 g/a also available)
R134a 122 20
R600a 122 21
R404A 122 22
R502a 122 23
R22 122 25
R23 122 26
R152a 122 27
R407C 122 28
R410A 122 29
R401A 122 30
R290 122 31
R744 (CO2) 122 32
10% Hydrogen (E-5 mbarl/s) 122 33
Halon 1301 (R13B1) 122 34
HFO-1234yf 122 35
Calibrated sniffer leak for helium
S-TL 4, approx.1 x 10
-4
mbar l/s 122 37
S-TL 5, range 10
-5
mbar l/s 122 38
S-TL 6, range 10
-6
mbar l/s 122 39