Operation of the Ecotec E3000 3-9
kina22e chapter 3.fm technical handbook(1206)
3.4.2.2 Selecting an I•Guide Program
To open the “SELECT I•GUIDE” menu press the ”PROGRAM LIST” button on the right side
of the display.
In the opening “
SELECT I•GUIDE” menu the currently selected program is indicated by
an arrow in front of the program name. Highlight the program number you intend to
use and press
OK. The new program is now loaded.
3.4.2.3 Using an I•Guide Program
In the measuring screen of the I•Guide operating mode the selected program, the
gas type stored in the program as well as the summarized global leak rate will be
displayed.
In the I•Guide message line the Ecotec E3000 will prompt the user for action. First it
will ask to move to the first testing position.
Also on the probe display the message “okay pos. 1?” will be shown. Please confirm
with the right probe button that the sniffer tip has reached the right location.
Fig. 3-8 Measuring Screen in I•Guide Mode
Pos. Description
1 program list
Fig. 3-9 Selecting an I•Guide program
To Next Page
Loading...
