Content 0-5
kina22eIVZ.fm Technical Handbook(1206)
7 Equipment Connections 7-1
7.1 I/O Port (Control Inputs and Outputs) 7-1
7.1.1 Ground connectors 7-2
7.1.2 24V Output 7-2
7.1.3 PLC Inputs 7-2
7.1.4 PLC Outputs 7-3
7.1.4.1 Relay outputs 7-4
7.1.4.2 Recorder Outputs 7-5
7.1.5 How to perform a calibration 7-6
7.2 RS232 interface 7-7
8 Maintenance 8-1
8.1 Maintenance schedule 8-1
8.2 Adjusting the IGS function 8-2
8.3 Exchanging the air filter 8-3
8.4 Replacing the Operation Fluid Reservoir 8-5
8.5 Exchanging the mains fuses 8-8
8.6 Replacing filters in the sniffer line 8-9
8.6.1 Replacing the felt discs of the capillary filter 8-9
8.6.2 Replacing the felt discs (with water protection tip) 8-11
8.6.3 Checking / replacing the sinter filter 8-11
8.7 Switching the capillary filter 8-12
8.7.1 Switching from metal to plastic capillary filter 8-13
8.7.2 Switching from plastic to metal capillary filter 8-14
8.8 Replacing the gas reservoir of the
ECO-Check 8-14
9 Annex 9-1
9.1 The gas library 9-1
9.2 Declaration of Conformity 9-10
To Next Page
Loading...
