Inficon UL3000 Fab ULTRA - 10 Accessories and interfaces; 10.1 Accessories and spare parts

10 | Accessories and interfaces INFICON
124 / 152 UL3000-Fab-ULTRA-Operating-instructions-iinb73en1-09-(2109)
10 Accessories and interfaces
10.1 Accessories and spare parts
The parts listed below can additionally be ordered:
Bus module
BM1000 PROFIBUS 560-315
BM1000 PROFINET IO 560-316
BM1000 DeviceNet 560-317
BM1000 EtherNet/IP 560-318
I/O module
IO1000 module 560-310
Data cable 0.5 m 560-334
Data cable 5 m 560-335
Data cable 10 m 560-340
Sniffer line SL200
SL200 sniffer line, 3.8 m long (an additional cable extension is
required for connection to UL3000 Fab devices)
14005
Cable extension for the electrical connection of the SL200 551-205
SL200 sniffer line and cable extension for the electrical
connection (set)
551-210
Sniffer line SL3000
SL3000-3, sniffer line 3 m length 525-001
SL3000-5, sniffer line 5 m length 525-002
SL3000-10, sniffer line 10 m length 525-003
SL3000-15, sniffer line 15 m length 525-004
Holder for sniffer line SL3000 551-203
Sniffer line for system integration (robotic application) 525-015
Sniffer tip for the SL3000
Sniffer tip ST312, 120 mm long, rigid 12213
Sniffer tip FT312, 120 mm long, flexible 12214
Sniffer tip ST200, 200 mm long, rigid 12218
Sniffer tip FT250, 250 mm long, flexible 12266
Sniffer tip ST385, 385 mm long, rigid 12215
Sniffer tip FT385, 385 mm long, flexible 12216
Sniffer tip FT600, 600 mm long, flexible 12209