Inficon UL3000 Fab ULTRA - Test chamber TC1000

INFICON Accessories and interfaces | 10
UL3000-Fab-ULTRA-Operating-instructions-iinb73en1-09-(2109) 127 / 152
Fig.21: Fasten the transmitter with Velcro in a free place
Search for the wireless remote control from the leak detector
If you have misplaced the RC1000WL wireless remote control, you can trigger from
your leak detector acoustic signals of this remote control.
1
> Setup > Accessories > RC1000
2
Select the setting “ON” in the field “Paging request”.
ð The remote control emits acoustic signals.
3
To stop signals from being emitted after finding the remote control, select "OFF"
in the "Paging request" field.
Test chamber TC1000
This test chamber converts the leak detector to a complete workstation, where
hermetically sealed components can be tested. Also as per Standard MIL-STD 883
testing can be performed easily, quickly and accurately. The tests start automatically
once the cover of the chamber is closed. Test parameters such as measurement time,
rejection rate can be set in the “Auto Leak Test” menu. The test is performed
automatically, the result is shown by red and greed LEDs which are located on the test
chamber. To operate this test chamber you also need a cable extension for the
electrical connection.