Inficon UL3000 Fab ULTRA - 3 Scope of delivery, Transport, Storage; Scope of delivery; Transport

INFICON Scope of delivery, Transport, Storage | 3
UL3000-Fab-ULTRA-Operating-instructions-iinb73en1-09-(2109) 15 / 152
3 Scope of delivery, Transport, Storage
Scope of delivery
Item Quantity
UL3000 Fab ULTRA 1
Exhaust hose adapter ISO-KF flange DN25 1
Hooks
1)
4
Power cable strain relief
2)
1
Screws M6 x 12 5
Guard washer S6 5
Mains connection cable (country-specific) 1
Centering ring
3)
with filter (for use with applications with dust / dirt
accumulation)
1
Wrench T25 1
Wrench T30 1
Operating manual 1
Unpacking instructions 1
Inspection certificate calibration leak 1
Inspection certificate leak detector 1
Bracket
4)
for corrugated tube 1
Self-tapping screws 2
Sticker with leak rate of the built-in helium test leak 1
In addition, 2 keys to open the jim-crow under the handle.
►
Check the delivery contents after receiving the product to ensure it is complete.
Explanations
1) For winding the power cord or the sniffer line on the device or on the optional
bottle holder. See "Overall device [}20]" and "Connect the supplied
accessories [}42]".
2) To guide the power cord from the device to the ground (avoiding the risk of
tripping). See "Connect the supplied accessories [}42]".
3) For inserting at the inlet flange, see “Inlet [}29]“.
4) For fixing a corrugated tube between the inlet flange of the device and the test
chamber or test object respectively". See "Connect the supplied accessories
[}42]".
Transport
Observe the following instructions when transporting the device: