Inficon UL3000 Fab ULTRA - START Button

4 | Description INFICON
24 / 152 UL3000-Fab-ULTRA-Operating-instructions-iinb73en1-09-(2109)
1 2 3 4
Fig.5: Control unit - rear view
1 HDMI interface
• For connection to the HDMI interface of a touch monitor, maximum
cable length 3 m. See also "Use external monitor [}91]".
2 / 3 USB 2.0 Interfaces
• To connect a touch monitor via USB cable.
• For inserting a USB flash drive with update information "Updating the
software [}89]".
• For inserting a USB flash drive for copying measurement data, see
"Measurement data [}81]".
• For inserting a WiFi USB adapter for a WiFi connection, see "Operate
leak detector via web browser (wireless LAN) [}137]".
4 Ethernet network interface
• For connection to a LAN network, maximum cable length 30 m
(shielded)
The remote control RC1000 is optionally available, see also "Accessories and spare
parts [}124].
You can also operate the device using a notebooks or tablets, see also "Operate leak
detector via web browser (wireless LAN) [}137]".
4.3.2.1 START button
• To start the measurements.
• Can be operated via the touchscreen of the control panel.
• If you press the START button again during measurement, the maximum leak rate
(Q
max
) that has occurred since START is displayed. See also "Assembly of the
touchscreen [}27]".