EasyManua.ls Logo

Inficon UL3000 Fab ULTRA - 5 Installation; 5.1 Setup

Inficon UL3000 Fab ULTRA
152 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
5 | Installation INFICON
38 / 152 UL3000-Fab-ULTRA-Operating-instructions-iinb73en1-09-(2109)
5 Installation
5.1 Setup
DANGER
Danger due to electric shock
The mains cable connected at both ends may be damaged or the wall socket may be
torn out if the leak detector is moved and the mains cable is tensioned as a result.
Moisture penetrating the device can cause personal injury due to electric shock and
property damage due to short circuits.
Check the power cord for damage before each use.
Make sure that the power cord is never under tension.
If you want to move the device, disconnect the power cord from the wall socket.
To prevent unintentional movement, fix the device at the destination by locking the
wheels with the parking brake.
Only operate the device in dry environments and only in buildings.
Operate the device away from sources of liquid and moisture.
Position the device so that you can always reach the plug for unplugging.
Do not operate the device in standing water and do not allow even a drop of water
or other liquid on the device.
WARNING
Health risk due to exhaust fumes and vapors
Exhaust fumes and vapors from pumps can be a health risk.
For operation in poorly ventilated rooms when using gases hazardous to health,
connect an exhaust pipe to the exhaust connection.

Table of Contents