INFICON Installation | 5
UL3000-Fab-ULTRA-Operating-instructions-iinb73en1-09-(2109) 41 / 152
Observe the information on transporting the device, see also “Scope of delivery,
Transport, Storage“.
Procedure
• So that measurement results are not falsified, use in an area that has a constant
ambient temperature if possible.
• For proper functioning of wheels and brakes, remove the adhesive strips from the
wheels.
• In order not to block the exhaust opening on the lower part of the device, place the
feet of the unit on a firm even surface.
• To easily reach the power switch on the back of the device, ensure there is
sufficient free space behind the device.
• Do not expose the device to direct sunlight.
To Next Page
Loading...