Inficon UL3000 Fab ULTRA - 6.2 Basic settings

6 | Operation INFICON
52 / 152 UL3000-Fab-ULTRA-Operating-instructions-iinb73en1-09-(2109)
6.2 Basic settings
You are able to save the actual settings of the device at any time, so that you can use
them at a later time, see also "Saving and managing sets of parameters [}88]".
6.2.1 Set language on the user interface
You can set the language in the user settings, see "Select, modify, create user profile
[}53]".
6.2.2 Setting date, time and time zone
ü
Supervisor
rights
1
> Setup > General > Date and time
2
Adjust.
3
Save .
Alternatively, press in the upper window bar and make your settings.
6.2.3 User profile settings
6.2.3.1 Overview of Rights Groups
The rights of a user depend upon which group he belongs to.
User
Members of the group
User
can
• perform measurements,
• view history of the measurement results,
• view device information,
• view error logs.
Operator
Members of the group
Operator
have all the rights of the group
User
. Moreover,
they can
• Create/modify/delete user,
• Export/delete measurement data,
• Modify measurement settings,
Supervisor
Members of the group
Supervisor
have all the rights of groups
User
and
Operator
.
Moreover, they can
• Create/modify/delete operators,
• Create/modify/delete supervisors,