Inficon UL3000 Fab ULTRA - Select, Modify, Create User Profile

INFICON Operation | 6
UL3000-Fab-ULTRA-Operating-instructions-iinb73en1-09-(2109) 53 / 152
• Perform software updates,
• Modify date/time.
6.2.3.2 Select, modify, create user profile
ü
Operator
or
Supervisor
rights
1
> User accounts > Manage user accounts
ð Existing users and associated groups are displayed in list form.
2
You have the following possibilities:
To create a new user profile, select at the bottom of the window.
The window "User profile" opens.
Otherwise, press an already created user name and choose from the tool bar:
, to load a user profile.
The login window opens.
, to modify a user profile.
The window "User profile" opens.
, to delete a user profile.
A confirmation screen appears.
3
After selecting some tools, the “User profile” window opens. If this window
opens, enter a user name, change it, or keep it as required.
Mueller
User
Mueller
PIN
Name
Group
Language
German
User profile
4
If the "PIN" field is not filled in or you want to change the content, enter a 4-digit
PIN.