Inficon UL3000 Fab ULTRA - 6.8 Log

INFICON Operation | 6
UL3000-Fab-ULTRA-Operating-instructions-iinb73en1-09-(2109) 87 / 152
►
> Energy > Power
6.7.7 Call information on the HYDRO•S
The internal parameters for HYDRO•S are displayed.
►
> HYDRO•S
6.7.8 Call information on the SL3000 Sniffer line
►
> Sniffer line
6.8 Log
6.8.1 Call the error and warning log
►
> Logs > Errors and warnings
If there are more than 20 entries always the oldest entry is deleted.
6.8.2 Call calibration log
The entries are for the entire period of use of the device. If there are more than
approx. 20 entries always the oldest entry is deleted.
►
> Logs > Calibrations
6.8.3 Call maintenance log
►
> Logs > Maintenance
If there are more than 20 entries always the oldest entry is deleted.
6.8.4 Call result log
To display test results in the operation modes “Auto Leak Test“ and “Vacuum”(Q
max
).
If there are more than 50 entries always the oldest entry is deleted.
►
> Logs > Result log