Inficon Wey-TEK HD Wireless - Initial Setup and Pairing Procedures; Wireless Base Setup; Android Device Pairing; Apple iPhone Pairing

3
English
1. Wey-TEK HD Wireless Base (Weighing Platform) Setup
a. Insert four AA alkaline batteries into the back of the wireless
base.
b. To turn the weighing platform on or off, long press the On/Off
button.
2. Pairing an Android™ Device with the Wireless Base
Requirement: Android 2.2 and above with Wey-TEK HD app
installed (available on Google Play™) and Bluetooth-enabled.
a. Turn the weighing platform On.
b. Press Bluetooth Pair. The yellow indicator will change from
flashing to solid.
c. Open the Wey-TEK HD Android app.
d. Tap Connect To Scale. A list of devices will display.
e. Tap Scale. The yellow indicator will extinguish when pairing
is complete.
3. Pairing an Apple iPhone
®
with the Wireless Base
Requirement: Apple iPhone 4s and above with the Wey-TEK
HD app installed (available on the App Store) and Bluetooth-
enabled.
a. Turn the weighing platform On.
b. Open the Wey-TEK HD app.
c. Tap Connect To Scale. A list of devices will display.
d. Tap Scale. The yellow indicator will extinguish when pairing
is complete.
4. Wey-TEK HD Handpiece Setup
If purchased together, Wey-TEK HD Wireless and the optional
handpiece are paired at the factory.
a. Insert four AA alkaline batteries into the back of the
handpiece.
b. To turn the handpiece On or Off, long press the On/Off
button.