Description – Setup PWM for dimmable LED2
on P5.8
For driving the dimmable LED2
on the XMC4800 Relax
EtherCAT Kit the DAVE App
PWM_CCU8 is used. The PWM
is set to start during
initialization, frequency is
500Hz and the initial duty cycle
is set to 50%. The pin P5.8 is
allocated to channel1 of CCU8
inside the manual pin allocator
(right-click PWM_CCU8 APP).
37
Copyright © Infineon Technologies AG 2016. All rights reserved.
To Next Page
Loading...
