Chapter 4: Library Mode & Host Control
55
Additionally, the Hot Key and pedals can be set to
advance patches and banks (MainStage) or scenes
(Forte) in a number of ways, as customized in the
software (and commonly assigned by „Learn‟ functions).
Pedals can be assigned to send Program Change data
to move from patch to patch, and the hot key can
additionally be set to cc#9 or cc#9 toggle mode as a
way of advancing banks or patches.
To access the 9 touchscreen MIDI cc# sliders, press the
right-side wheel. In MainStage these sliders are
premapped to the patch and global control knobs
across the top of the Workspace window. Touching any
of the 9 columns or the cc# box at the bottom activates
the desired slider; rotating the right wheel moves the
slider, as does pressing the tip of your finger to the
screen. Pressing the green button switches from the
sliders to the virtual drawbar controller mode. Press the
right wheel to exit and return to the patch list.
To Next Page