Infiniter ML-200G User Manual

SPECIFICATIONS
Dimension(L X W X H)
4.88”X2.13”X2.32”(10.1cm X 5.4cm X 5.9cm)
Weight
9.80oz (280g)
Wavelength
520nm
Output power
ClassⅢa CW mode
Width of laser line
<3mm at 5M
Operating temp range
-4 ﾟ F ~ 140 ﾟ F (-20゜C ~ +60 ﾟ C)
Mean time to failure
10,000 hours
Emitting angle
>120 ﾟ
Housing
Metal
Finishing
Black anodized
Power
DC Adaptor 5~6V,>0.5A
WARNING
Use of controls of adjustment or performance of procedures other than those
specified herein may result in hazardous radiation exposure
SAFETY PRECAUTIONS
Laser radiation is harmful to the eyes, never look directly into the laser beam or its direct reflection
1. Never aim the laser beam at persons’ eyes
2. This unit must be used by experienced technical personnel only
Do not leave the laser beam unattended
3. Do not target vehicles or aircraft with the laser beam when the unit is used
outdoors
4. Do not look directly into laser beam with optical instrumentation unless adequate
protective filters are used to protect the eyes.
5. Avoid aiming the laser beam at mirror- likes surfaces. Remove any unnecessary
mirror-likes surface from the vicinity of the laser beam path.
6. The warranty will no longer exist once the product been taken apart.
Stone cutting
Wood cutting
Wood cutting
Wood cutting

Infiniter ML-200G Specifications

General

Brand	Infiniter
Model	ML-200G
Category	Measuring Instruments
Language	English