Installation
Important! For electrical connection carefully
follow the instructions given in specific
●Unpack the
appliance and check if there are
damages on it. Do not connect the appliance
if it is damaged. Report possible damages
immediately to the place you bought it. In that
●It is
advisable to wait at least four hours
before connecting the appliance to allow the
●Adequate air circulation should be around
the appliance,lacking this leads to
overheating. To achieve sufficient ventilation
follow the instructions relevant to
●Wherever
possible the spacers of the
product should be against a wall to avoid
touching or catching warm parts (compressor,
con-
●The appliance must not be located close to
●Make sure
that the mains plug is accessible
To Next Page
Loading...
