6
7
Stop
How to remove the nozzle
When you want to pause use, tap the power
button to shut down; The machine will auto-
matically shut down after each gear is set to
run for 2 minutes.
While pressing the nozzle release button, pull
the nozzle up.
About maintenance
• After use, open the water tank cover and remove the accumulated water in
the water tank;
• If there is dirt inside the water tank, you can pour a small amount or less of
40°C warm water into the water tank,cleaned it slightly, and then the above
operations are carried out.
• To keep it clean, rinse the nozzle with clean water and dry it after each use.
• When cleaning this product, please gently wash away the dirt with clean tap
water (owing water).
• After cleaning, wipe off the water with a dry cloth and dry it. If the nozzle is
damaged, replace it with the attached spare nozzle.
To Next Page
Loading...