Black plate (264,1)
Model "INFINITI_NAVI" EDITED: 2006/ 3/ 20
INFINITI VOICE RECOGNITION
INFINITI Voice Recognition allows hands-
free operation of the navigation system
and other systems equipped on this
vehicle, such as the display, audio, climate
control and phone.
INFO:
.
For the voice commands for the audio, air
conditioner and other systems (except
navigation system), refer to the Owner’s
Manual of your vehicle.
.
INFINITI Voice Recognition activates only
when English is set as the language for
the system. INFINITI Voice Recognition can-
not be activated by pushing <TALK> if French
is set for the system.
.
Vo ice recognition can be used to set
destination street addresses that exist with-
in the continental United States (48 States).
Street addresses in Canada, Alaska and
Hawaii cannot be entered using voice
recognition.
USING THE SYSTEM
Initialization
When the ignition switch is pushed to the
ON position, INFINITI Voice Recognition is
initialized, which takes a few seconds.
When completed, the system is ready to
accept voice commands. If <TALK> is
pushed before the initialization completes,
the display will show the message: “Pho-
netic data downloaded. Please wait.”
BEFORE STARTING
To get the best recognition performance
out of INFINITI Voice Recognition, observe
the following:
. The interior of the vehicle should be as
quiet as possible. Close the windows to
eliminate the surrounding noises (traf-
fic noise and vibration sounds, etc.),
which may prevent the system from
correctly recognizing the voice com-
mands.
. Wait until the tone sounds before
speaking a command. Otherwise, the
command will not be recognized prop-
erly.
. Speak in a natural conversational voice
without pausing between words.
. If the air conditioner is set to “Auto”,
the fan speed is automatically lowered
so that your commands can be recog-
nized more easily.
9. Voice recognition (M45/M35 only)
9-2
To Next Page
Loading...