Black plate (314,1)
Model "INFINITI_NAVI" EDITED: 2006/ 3/ 20
VOICE RECOGNITION (M45/M35 only)
Symptom Possible cause Possible solution
The system does not recognize
your command.
or
The system recognizes your
command incorrectly.
The interior of the vehicle is too noisy. Close the windows or have other occupants be quiet.
The volume of your voice is too low. Speak louder.
The volume of your voice is too loud. Speak softer.
Your pronunciation is unclear. Speak clearly.
You are speaking before the voice recognition mode is ready. Push and release
<TALK> on the steering switch, and speak a command
after the tone sounds.
8 seconds or more have passed after you pushed and
released
<TALK> on the steering switch.
Make sure to speak a command within 8 seconds after you push and
release
<TALK> on the steering switch.
Only a limited range of voice commands is usable for each
screen.
Use a correct voice command appropriate for the current screen.
The sound of the fan of the air conditioner is too loud. If the air conditioner is set to “Auto”, the fan speed is automatically
lowered and voice commands can be recognized more easily.
Lower the fan speed as necessary or set the air conditioner to “Auto”.
11. Troubleshooting guide
11-10
To Next Page
Loading...