[ Edit: 2016/ 6/ 21 Model: 2017MY INFINITI Q50(V37) OM17E00V37U0 ]
2-22 Instruments and controls
INDICATORS FOR OPERATION
V37-D-121025-64909E7F-8C96-4E67-B3E1-6588D21079FB
1. Engine start operation indicator
V37-D-121025-A88CA30F-9D2B-44F6-9328-D7C4F5F6F61E
This indicator appears when the shift lever
is in the P (Park) position.
This indicator means that the engine will
start by pushing the ignition switch with
the brake pedal depressed. You can start
the engine directly in any position of the
ignition switch.
2. NO KEY warning
V37-D-121025-796E92CE-2B32-4D77-9DD6-0EE555C64AB0
The warning appears when the door is
closed with the Intelligent Key left outside
the vehicle and the ignition switch in the
ACC or ON position. Make sure that the
Intelligent Key is inside the vehicle.
See “Intelligent Key system” (P.3-7) for
more details.
3. SHIFT “P” warning
V37-D-121025-A781E6D3-618F-498F-BC4D-3983287D1D01
This warning appears when the ignition
switch is pushed to stop the engine with
the shift lever in any position except the P
(Park) position.
If this warning appears, move the shift
lever to the P (Park) position or push the
ignition switch to the ON position.
An inside warning chime will also sound.
(See “Troubleshooting guide” (P.3-15).)
4. “PUSH” warning
V37-D-121025-3341FC08-E770-4537-B5E3-AB7ACF1A086E
This warning appears when the shift lever
is moved to the P (Park) position with the
ignition switch in the ACC position after the
SHIFT “P” warning appears.
To push the ignition switch to the OFF
position, perform the following procedure:
. SHIFT “P” warning ? (Move the shift
lever to “P”) ? PUSH warning ? (Push
the ignition switch ? ignition switch
position is turned to ON) ? PUSH
warning ? (Push the ignition switch
? ignition switch position is turned to
OFF)
5. Intelligent Key battery discharge
indicator
V37-D-121025-10DAEEAD-9FC3-4942-82E3-9B4A53F13AE8
This indicator appears when the Intelligent
Key battery is running out of power.
If this indicator appears, replace the
battery with a new one. (See “Intelligent
Key battery replacement” (P.8-27).)
6. Engine start operation for Intel-
ligent Key system indicator
V37-D-121025-F558F0B2-E1D4-41C4-9263-962DF1A50AF4
This indicator appears when the Intelligent
Key battery is running out of power and
when the Intelligent Key System and
vehicle are not communicating normally.
If this indicator appears, touch the ignition
switch with the Intelligent Key while
depressing the brake pedal. (See “Intelli-
gent Key battery discharge” (P.5-14).)
7. Remote engine start indicator (if
so equipped)
GUID-5F91AF9A-3A09-4072-8E39-923C00EFA249
This indicator appears when the engine
has been started using the remote start
function. To start the vehicle, depress the
brake pedal and place the ignition switch
in the ON position.
For more details, see “Remote engine
start” (P.3-21).
8. Key ID Incorrect warning
GUID-1048347A-3391-4966-8AA2-5D3B83859A7D
This warning appears when the ignition
switch is pushed from the LOCK position
and the Intelligent Key cannot be recog-
nized by the system. You cannot start the
engine with an unregistered key. Use the
registered Intelligent Key.
See “Intelligent Key system” (P.3-7).
9. Parking brake release warning
V37-D-121025-D0E7A2F3-E58C-4AB1-956B-CF6828D72988
This warning appears when the vehicle
speed is above 4 MPH (7 km/h) and the
Condition:
To Next Page
Loading...