[ Edit: 2016/ 6/ 21 Model: 2017MY INFINITI Q50(V37) OM17E00V37U0 ]
JVI0655X
Sunshade
V37-D-121025-1CD6C51E-2CF6-43DE-9B7C-FDFE087F32E1
The sunshade will open automatically
when the moonroof is opened. However,
it must be closed manually.
Tilting the moonroof
V37-D-121025-7327959F-D789-4278-BFE2-34D57E1B72DD
To tilt up, first close the moonroof, then
push the switch to the tilt up position
*
1
and release it; it need not be held. To tilt
down the moonroof, push the switch to the
tilt down position
*
2
.
Sliding the moonroof
V37-D-121025-78F09A38-DBBE-4D88-953D-2C8E2EF42DCE
To fully open or close the moonroof, push
the switch to the open
*
2
or close
*
1
position and release it; it need not be
held. The roof will automatically open or
close all the way. To stop the roof, push the
switch once more while it is opening or
closing.
Operating moonroof with Intelli-
gent Key (if so equipped)
GUID-E4015F80-54F8-47FF-8F59-6B9BB1333A81
The moonroof can be opened by pushing
the UNLOCK button on the Intelligent Key.
This function will not operate while the
moonroof timer is activated or when the
moonroof need to be initialized. For details
about the Intelligent Key button usage, see
“How to use remote keyless entry system”
(P.3-17).
Opening:
GUID-2CDBA8EF-1D2A-4175-B845-A9115A81FDDB
To open the sunroof, push the UNLOCK
button on the Intelligent Key for about 3
seconds after the door is unlocked.
To stop opening, release the
button.
Auto reverse function
V37-D-121025-FAC8DE64-E355-4396-BF7A-507608B95F7B
WARNING
There are some small distances immediately
before the closed position which cannot be
detected. Make sure that all passengers
have their hands, etc., inside the vehicle
before closing the moonroof.
If the control unit detects something
caught in the moonroof when it is closing,
the moonroof will be immediately opened.
The auto reverse function can be activated
when the moonroof is closed by automatic
operation when the ignition switch is in the
ON position or for about 45 seconds after
the ignition switch is pushed to the OFF
position.
If the moonroof cannot be closed auto-
matically when the auto reverse function
activates due to a malfunction, push and
hold the moonroof switch to the close
position
*
1
.
Depending on the environment or driving
conditions, the auto reverse function may
be activated if an impact or load similar to
something being caught in the moonroof
Instruments and controls 2-57
Condition:
To Next Page
Loading...