EasyManua.ls Logo

Infinity Q50 2017 - Page 240

Infinity Q50 2017
470 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
(239,1)
[ Edit: 2016/ 6/ 21 Model: 2017MY INFINITI Q50(V37) OM17E00V37U0 ]
JVS0614X
*
1
Vehicle information display
SYSTEM TEMPORARILY UNAVAIL-
ABLE
GUID-A3F1FBC7-3C7C-422F-89E8-E1EA6FB0F745
When radar blockage is detected, the BSW
system will be turned off automatically, a
chime will sound and the “side radar
obstruction” warning message will appear
in the vehicle information display
*
1
.
The system is not available until the
conditions no longer exist.
The radar sensors may be blocked by
temporary ambient conditions such as
splashing water, mist or fog. The blocked
condition may also be caused by objects
such as ice, frost or dirt obstructing the
radar sensors.
Action to take:
When the above conditions no longer exist,
the system will resume automatically.
If the “side radar obstruction” warning
message continues to appear, have the
system checked. It is recommended you
visit an INFINITI retailer for this service.
SYSTEM MALFUNCTION
GUID-9F864D7B-6938-4277-8C51-85F7D8063C8B
When the BSW system malfunctions, it will
be turned off automatically, a chime will
sound, and the system “malfunction”
warning message with the driver assist
system blind spot indicator (orange) will
appear in the vehicle information display.
Action to take:
Stop the vehicle in a safe location and
place the shift lever in the P (Park) position.
Turn the engine off and restart the engine.
If the system “malfunction” warning mes-
sage with the driver assist system blind
spot indicator (orange) continues to be
displayed, have the BSW system checked.
It is recommended you visit an INFINITI
retailer for this service.
JVS0489X
SYSTEM MAINTENANCE
GUID-3E2CB2B6-EFF5-4692-A6F0-7D9EB7740A24
The two radar sensors
*
1
for the BSW
system are located near the rear bumper.
Always keep the area near the radar
sensors clean.
The radar sensors may be blocked by
temporary ambient conditions such as
splashing water, mist or fog.
The blocked condition may also be caused
by objects such as ice, frost or dirt
obstructing the radar sensors.
Check for and remove objects obstructing
the area around the radar sensors.
Do not attach stickers (including transpar-
Starting and driving 5-49
Condition:

Related product manuals