[ Edit: 2016/ 6/ 21 Model: 2017MY INFINITI Q50(V37) OM17E00V37U0 ]
8-44 Do-it-yourself
SDI1663
*
1
: Wear indicator
*
2
: Wear indicator location mark. The
locations are shown by “
”, “TWI”,
etc. depending on tire types.
Tire wear and damage
V37-D-121025-58006A64-896F-4DFB-91F4-017EF718D94E
WARNING
.
Tires should be periodically
inspected for wear, cracking,
bulging or objects caught in
the tread. If excessive wear,
cracks, bulging or deep cuts
are found, the tire(s) should
be replaced.
.
The original tires have built-in
tread wear indicators. When
wear indicators are visible,
the tire(s) should be replaced.
.
Tires degrade with age and
use. Have tires, including the
spare, over 6 years old
checked by a qualified techni-
cian, because some tire da-
mage may not be obvious.
Replace the tires as necessary
to prevent tire failure and
possible personal injury.
.
Improper service of the spare
tire may result in serious
personal injury. If it is neces-
sary to repair the spare tire, it
is recommended you visit an
INFINITI retailer for this ser-
vice.
.
For additional information re-
garding tires, refer to “Impor-
tant Tire Safety Information”
(US) or “Tire Safety Informa-
tion” (Canada) in the War-
ranty Information Booklet.
Replacing wheels and tires
V37-D-121025-6EFCFC7E-F45A-4C3D-BB51-B8D72A168C0C
When replacing a tire, use the same size,
tread design, speed rating and load carry-
ing capacity as originally equipped. (See
“Specifications” (P.10-10) for recom-
mended types and sizes of tires and
wheels.)
After the ignition switch is placed in the ON
position, it may take a period of time for
the tire pressure to be displayed in the
vehicle information display while the ve-
hicle is driven. Depending on the radio
wave circumstance, tire pressure may not
correctly be displayed.
WARNING
. The use of tires other than those
recommended or the mixed use of tires
of different brands, construction (bias,
bias-belted, radial or run-flat), or tread
patterns can adversely affect the ride,
Condition:
To Next Page
Loading...