Infinity Q70 - Page 257

(256,1)
[ Edit: 2016/ 8/ 1 Model: 2017MY INFINITI Q70(Y51) OM17E00Y51U0 ]
4-76 Monitor, climate, audio, phone and voice recognition systems
ON·OFF/Volume control:
Y51D-V-E01-92D07B73-0194-4EA2-B196-01E466CF6FF5
Push the ignition switch to the ACC or ON
position, and then push the ON·OFF button
while the system is off to turn on the last
audio source, which was playing immedi-
ately before the system was turned off.
While the system is on, pushing the
ON·OFF button turns the system off.
Turn the VOL control knob to adjust the
volume.
Adjusting tone quality and speaker bal-
ance:
Y51D-V-E01-0355AAE0-5961-4143-97F8-008BF5B12936
To adjust Bass, Treble, Balance and Fade,
push the Audio control knob. When the
display shows the setting you want to
change (Bass, Treble, Balance and Fade),
rotate the Audio control knob to set the
desired setting. For the other setting
methods, see “How to use SETTING button”
(P.4-16).
This vehicle has some sound effect func-
tions as follows:
. Speed Sensitive Vol.
. Precision Phased Audio (if so equipped)
. BOSE
®
Centerpoint 2 (if so equipped)
. BOSE
®
AudioPilot 2 (if so equipped)
. Surround effect (if so equipped)
For more details, see “How to use SETTING
button” (P.4-16).
Switching the display:
Y51D-V-E01-373A6FF6-AD1E-4098-BC55-8B69C4810B14
Pushing the DISC·AUX button will switch
the displays as follows:
. Models with navigation system
iPod
®
/USB ? CD/DVD ? Bluetooth
®
Audio ? iPod
®
/USB
. Models without navigation system
iPod
®
/USB ? CD ? iPod
®
/USB
Linking Intelligent Key (models with navi-
gation system):
Y51D-V-E01-A120C0D4-C355-405E-B5F4-6BDFB380E49E
The audio settings can be memorized for
each Intelligent Key. For more details, see
“Setting memory function” (P.3-31).
FM-AM-SAT radio operation
Y51D-V-E01-87805BD4-032C-4FD6-ADD3-E6C276E34F8A
When the radio band select button is
pushed while the ignition switch is in the
ACC or ON position, the radio will come on
at the channel last played.
The last channel played will also come on
when the ON·OFF button is pushed to ON.
If another audio source is playing when the
radio band select button is turned to ON,
the audio source will automatically be
turned off and the last radio channel
played will come on.
When the stereo broadcast signal is weak,
the radio will automatically change from
stereo to monaural reception.
radio (FM·AM) band select :
Y51D-V-E01-8687C1CE-1F9E-473E-AFCE-89BDE57CA5C8
Pushing the XM radio band select button
will change the band as follows:
AM ? FM1 ? FM2 ? AM
radio (XM) band select:
Y51D-V-E01-2A00A202-A8FD-4BC9-A17B-851741F98133
Pushing the XM radio band select button
will change the band as follows:
XM1 ? XM2 ? XM3 ? XM1
The satellite radio is not available in
Alaska, Hawaii and Guam.
TUNE (Tuning) :
Y51D-V-E01-4C0E8E5D-C3FA-4847-8C39-7D36A7E15E3B
. For AM and FM radio
Turn the radio TUNE knob for manual
tuning.
. For SiriusXM Satellite Radio
Turn the radio TUNE knob to seek
channels from all of the categories
when any category is not selected.
Condition: