[ Edit: 2016/ 8/ 1 Model: 2017MY INFINITI Q70(Y51) OM17E00Y51U0 ]
4-126 Monitor, climate, audio, phone and voice recognition systems
USING THE SYSTEM
Y51D-V-E01-5E81D89F-C8CF-4D6D-BD66-54D31A01DF23
Initialization
Y51D-V-E01-B86C7854-275F-4941-81CB-A3A6D12FE6CE
When the ignition switch is pushed to the
ON position, INFINITI Voice Recognition is
initialized, which can take up to one
minute. When completed, the system is
ready to accept voice commands. If the
TALK
switch is pushed before the
initialization completes, the display will
show the message: “System not ready.” or
a beep sounds.
Before starting
Y51D-V-E01-553337EB-04D2-4696-A13E-069A82076309
To get the best recognition performance
from INFINITI Voice Recognition, observe
the following:
. The interior of the vehicle should be as
quiet as possible. Close the windows to
eliminate the surrounding noises (traf-
fic noise and vibration sounds, etc.),
which may prevent the system from
correctly recognizing the voice com-
mands.
. Wait until the tone sounds before
speaking a command.
. Speak in a natural conversational voice
without pausing between words.
. If the air conditioner is set to “Auto”,
the fan speed is automatically lowered
so that your commands can be recog-
nized more easily.
SAA3001
Giving voice commands
Y51D-V-E01-CD13145C-E7AD-4223-B3DD-6118CD20A2EC
1. Push the TALK switch located on
the steering wheel.
2. A list of commands appears on the
screen, and the system announces.
3. After the tone sounds and the icon on
the screen changes from
to ,
speak a command.
Selecting the “Practice” key will start
the practice mode. See “Let’s Practice”
(P.4-125).
4. Continue to follow the voice menu
prompts and speak after the tone
sounds until your desired operation is
Condition:
To Next Page
Loading...
