[ Edit: 2016/ 8/ 1 Model: 2017MY INFINITI Q70(Y51) OM17E00Y51U0 ]
JVS0714X
*
1
DCA system switch indicator (on the
vehicle information display)
*
2
Center display
*
3
Dynamic driver assistance switch
*
4
Center multi-function control panel
TURNING THE DCA SYSTEM ON/OFF
GUID-7228F1CA-0902-4061-AC97-F91A79BF6150
To turn on the DCA system, push the
dynamic driver assistance switch
*
3
on
the steering wheel after starting the
engine. The DCA system switch indicator
*
1
in the vehicle information display will
appear. Push the dynamic driver assis-
tance switch
*
3
again to turn off the DCA
system. The DCA system switch indicator
*
1
will turn off.
The system will start to operate after the
vehicle speed is above approximately 3
MPH (5 km/h).
The dynamic driver assistance switch
*
3
is
used for the Lane Departure Prevention
(LDP), Blind Spot Intervention (BSI) and
DCA systems. When the dynamic driver
assistance switch
*
3
is pushed, the LDP
and BSI systems will also turn on or off
simultaneously. The DCA system can be
individually set to on or off on the center
display
*
2
and using the center multi-
function control panel
*
4
. If the system is
set to off, the system will not turn on even
if the dynamic driver assistance switch
*
3
is pushed to on. To set the system to on or
off on the display, see “How to enable/
disable the DCA system” (P.5-100).
Starting and driving 5-99
Condition: