[ Edit: 2016/ 8/ 1 Model: 2017MY INFINITI Q70(Y51) OM17E00Y51U0 ]
9. Check to make sure the child restraint
is properly secured prior to each use. If
the seat belt is not locked, repeat steps
2 through 8.
SSS1085
Forward-facing — step 10
10.If the child restraint is installed in the
front passenger seat, place the ignition
switch in the ON position. The front
passenger air bag status light
should illuminate. If this light is not
illuminated, see “Front passenger air
bag and status light” (P.1-48). Move the
child restraint to another seating posi-
tion. Have the system checked. It is
recommended you visit an INFINITI
retailer for this service.
After the child restraint is removed and the
seat belt is fully retracted, the ALR mode
(child restraint mode) is canceled.
SSS0791
Installing top tether strap
Y51D-V-E01-C501F3B2-B525-4F0E-A619-D50D32F95904
The child restraint top tether strap must be
used when installing the child restraints
with the seat belts.
First, secure the child restraint with the
seat belt.
1. Flip up the anchor cover from the
anchor point which is located directly
behind the child restraint.
2. If necessary, raise or remove the head
restraint or headrest to position the top
tether strap over the top of the seat-
back. If the head restraint or headrest
is removed, store it in a secure place.
Safety — Seats, seat belts and supplemental restraint system 1-35
Condition:
To Next Page
Loading...
