Infinity Q70 - Page 99

(98,1)
[ Edit: 2016/ 8/ 1 Model: 2017MY INFINITI Q70(Y51) OM17E00Y51U0 ]
2-18 Instruments and controls
others, have your vehicle checked. It is
recommended you visit an INFINITI retailer
for this service.
Vehicle Dynamic Control (VDC)
warning light
Y51D-V-E01-C0AA7A1A-7629-49A7-89B8-6292243BC6FA
When the ignition switch is in the ON
position, the Vehicle Dynamic Control
(VDC) warning light illuminates and then
turns off.
The light will blink when the VDC system or
the traction control system is operating,
thus alerting the driver that the vehicle is
nearing its traction limits. The road surface
may be slippery.
When the VDC warning light illuminates
when the VDC system is turned on, this
light alerts the driver to the fact that the
VDC system’s fail-safe mode is operating,
for example the VDC, active trace control (if
so equipped), Rise-up & Build-up function,
Brake Force Distribution or hill start assist
system may not be functioning properly.
Have the system checked. It is recom-
mended you visit an INFINITI retailer for
this service. If a malfunction occurs in the
system, the VDC system function will be
canceled but the vehicle is still driveable.
For additional information, see “Vehicle
Dynamic Control (VDC) system” (P.5-131).
INDICATOR LIGHTS
Y51D-V-E01-756E256E-AAC8-4DFC-B523-5734358B5B43
Adaptive Front lighting System
(AFS) off indicator light (if so
equipped)
Y51D-V-E01-D4A08820-0AEE-43A9-BED0-34FC0794EE2D
When the ignition switch is pushed to the
ON position, the Adaptive Front lighting
System (AFS) off indicator light will illumi-
nate. The light will turn off in about 1
second if the AFS is operational.
This light also illuminates when the AFS is
turned off using the AFS switch.
If the AFS off indicator light blinks, it may
indicate the AFS is not functioning prop-
erly. Have the system checked. It is
recommended you visit an INFINITI retailer
for this service.
See “Adaptive Front lighting System (AFS)”
(P.2-39).
Automatic Transmission (AT)
position indicator light
Y51D-V-E01-96FE5B8E-78D9-4CE6-88E5-B9EAA6A7165B
When the ignition switch is pushed to the
ON position, the indicator shows the
automatic shift position.
In the manual shift mode, when the
transmission does not shift to the selected
gear due to a transmission protection
mode, the AT position indicator light will
blink and a chime will sound.
See “Automatic transmission” (P.5-15) for
further details.
Blind Spot Intervention
®
(BSI)
ON indicator light (green; if so
equipped)
Y51D-V-E01-2B1D6011-3808-48B3-A1F3-1BA427253F4C
The light comes on in green when the Blind
Spot Intervention
®
(BSI) system is turned
on. The light turns off when the system is
turned off.
NOTE:
This light is common with the Blind Spot
Warning (BSW)/Blind Spot Intervention
(BSI) system warning light (orange). (See
“Blind Spot Warning (BSW)/Blind Spot
Intervention
®
(BSI) system warning light”
(P.2-14).)
For more details, see “Blind Spot Warning
(BSW)” (P.5-34).
Condition: