head restraint and it is interfering with the
proper child restraint fit, tryanother seating
position or adifferent child restraint.
4. Shortenthe rigid attachment to have the
child restraint firmly tightened; pressdown-
ward
j
3andrearward
j
4firmlyin the centre
of thechildrestraint with your knee to com-
pressthe vehicle seat cushion and seatback.
5. If thechildrestraint is equipped with atop
tether strap, route the top tether strapand
secure the tether straptothe tether anchor
point
.(
See
“Toptether anchor locations” earlier
in thissection
.)
6. If the child restraint is equipped with other
anti-rotationdevices suchassupportlegs,
usethem instead of the top tether strap fol-
lowingthe child restraint manufacturer’s in-
structions.
7. Test the child restraint before youplace the
ch
ild in it
j
5.Push the child restraint from
side to side and tugitforward to make sure
that it is held securely in place.
8. Checktomakesure that the child restraint is
properly secured prior to each use. If the
child restraint is loose, repeat steps3
through 7.
Rear-facing:
Be sure to follow the manufacturer’s instruc-
tionsfor the proper use ofyour child restraint.
Follow these stepstoinstall arear-facing child
restraint on the rear outer seats using ISOFIX:
1. Position the child restraint on the seat
j
1.
2. Secure the child restraint anchor attach-
ments to the ISOFIX lower anchors
j
2.
SSS0754AZ
Step 4
SSS0755AZ
Step 7
SSS0649AZ
Steps 1and 2
SSS0756AZ
Step3
Safety — seats, seat belts and supplemental restraint system 1-21
To Next Page
Loading...