The followingare approximate capacities.The actual refillquantities maybeslightly different.When refilling, follow the proceduresinstructedinthe “8.
Maintenanceand do-it-yourself” section to determine the proper refill capacity.
Approximate Capacity
Recommended Fluids//Lubricants
Engine type Metric MeasureImperial Measure
Fuel tank
50 L
(4WD: 56 L)
11 gal
(4WD: 12.3 gal)
– See “Fuel information” later in thissection
.
Engine oil (*)
Theapproximate capacities listed arefor refilling during an engine oil
change. *: Foradditional information, see “Changingengine oil and oil
filter” in the “8. Maintenance and do-it-yourself” section
.
1.6L and2.0L petrol engine:
– GenuineINFINITI engine oil, Viscosity SAE0W-30
1.5L dieselengine:
– Genuine INFINITI engine oil
– ACEA C4 DPF,Viscosity SAE5W-30
2.2Ldiesel engine:
– TOTALQUARTZINEOMC3 engine oil
– ACEA C3, Viscosity SAE5W-30
Foradditional information, see “Recommended SAEviscosity number” later
in thissection
.
Drainand refill
With oil filter
change
1.6L petrol 5.8 L5.1 qt
2.0L petrol 5.6 L5qt
1.5Ldiesel 4.5 L4qt
2.2L diesel 6.5L 5.7 qt
Cooling system
With reservoir
1.6L petrol (MT) 6.6L 5.8 qt
– Genuine INFINITI Engine Coolant or equivalent in its quality
BASF Glysantin® G40®
– UseGenuine INFINITI Engine Coolant, or equivalent in its quality,in
order to avoid possiblealuminium corrosion within the engine cooling
system caused by the useofnon-genuine engine coolant. Note that any
repairsfor incidents with the engine cooling system while using non-
genuine engine coolant maynot be covered by the warranty even if
suchincidents occurred during the warranty period.
1.6Lpetrol (AT) 7.6L 6.7qt
2.0L petrol 7.66.7 qt
1.5L diesel (MT) 6.3L 5.5 qt
1.5L diesel (AT) 7.36.4 qt
2.2L diesel 9.6 L8.5 qt
AutomaticTransmission
Fluid (ATF)
1.6Lpetrol 5.91 L5.2 qt ShellDCT-M1
2.0Lpetrol 6.21 L5.5 qt
1.5Ldiesel 5.74L 5.1 qt
2.2L diesel 6.21 L5.5 qt
RECOMMENDED FLUIDS/LUBRICANTSAND CAPACITIES
9-2 Technical information
To Next Page
Loading...