Need help?Do you have a question about the Infinova V6822-T0 Series and is the answer not in the manual?
General| Image Sensor | 1/2.8" Progressive Scan CMOS |
|---|---|
| Max. Resolution | 1920 x 1080 |
| Wide Dynamic Range (WDR) | 120dB |
| Focal Length | 2.8-12mm |
| Operating Conditions | -30°C to +60°C |
| Power Supply | DC12V, PoE |
| Minimum Illumination | 0.01Lux (Color), 0Lux (IR on) |
| Video Compression | H.264, MJPEG |
| Frame Rate | 30fps @ 1080p |
| Network Interface | RJ45 10/100Mbps |
Manual reproduction and modification restrictions.
Identifies registered trademarks of Infinova and other entities.
Compliance statement for FCC rules regarding digital device interference.
Overview of the V6822-T0 series IP minidome camera features and capabilities.
Detailed list of the camera's hardware and software functionalities and advantages.
Specifies minimum PC hardware and software requirements for operating the camera system.
Lists the specific models within the V6822-T0 series and their key differences.
Comprehensive technical specifications of the camera, including sensor, lens, resolution, and performance.
Important guidelines and advice for proper installation, handling, and maintenance of the camera.
Instructions for drilling holes for mounting the camera base and routing cables.
Steps for attaching the upper housing of the camera, including managing the safety rope.
Guide on how to adjust the camera's panning, tilting, and rotating angles after installation.
Procedures for installing the protective dome bubble onto the camera housing.
How to connect the IP minidome camera to a computer or network.
Step-by-step guide for installing necessary browser controls and software for camera viewing.
Instructions on how to access and view the live video feed from the camera using a web browser.
Accessing system settings, including information, time, and advanced configurations.
Configuration of IP mode (IPv4/IPv6), DHCP, DNS, and PPPoE for network connectivity.
Main interface for configuring various camera parameters.
Interface for configuring audio and video stream parameters.
Setup for alarm inputs/outputs, alarm servers, and alarm scheduling.
Interface for managing video recording parameters and SD card operations.
Management of user accounts, including adding, deleting, and changing passwords.
Viewing system event logs, including date, time, and operation details.
Technical details on multi-level anti-lightning and surge protection measures for the device.
To Next Page