Infitronic GmbH, Dresdener Strasse 2-4, 63667 Nidda-Harb,Germany
Webseite:www.infitronic.de Email : office@infitronic.de
■ Panel and Functions
■ Specifications
1.Eighteen light emitting diodes (LEDs) illuminate up to pianos,keyboads , music stands and books,
2.16 hours of battery life for continuous using on the low setting or 10 hours on the high setting
3.Easy access cool/warm button on bottom controls Cool white light and warm white light
4.Strong and flexible gooseneck arm that moves in as many directions as needed
5.Sturdy clip attaches to music stand or sits freestanding
6.Shade on back of lamp head directs more light on music and reduces glare towards audience
7.Power supply by 3x AA batteries or AC adaptor(Input:AC100-240V ,50/60Hz; Output:5V, 1A)
8.Product weight:Approx.210g
When the battery nears its end,theLED light becomes
dim,weak.Replace the battery immediately. Or use the
light with the AC adaptor.
1.Open the battery cover and insert the batteries so
the positive end(+) and the negative end(-) align as
illustrated in the battery compartment diagram.
2.The negative end(-) is always aligned with a spring
mechanism.
3.Batteries will have alternating alignment -2batteries
in one direction, and 1battery in the opposite direction
as shown on the back of the light.
4.Do not mix battery brand.(all three batteries must be
the same brand)
5.Do not mix alkaline standard(carbon-zinc), or
rechargeable(nickel-cadmium)batteries.
6.Do not attempt to recharge non-rechargeable
batteries.
■ Battery replacement
!
CAUTION
Dear Customer:
Thank you for choosing IN18LEDNL clip on light. Please read the user's manual carefully before using this product, and operate
the product according to the manual.Please keep this manual for later reference.
◇ Do not open the casing for any reason as this may cause short circuit or malfunction of the product.
◇ Do not apply excessive force to the products.In the event of the product suffering breakage,be careful not to
damage yourself with the broken pieces.
◇ Do not put in any liquid nor foreign object.
◇ Keep unit away from dust,extreme temperatures and humidity.
◇ When the unit is not in use for a long period of time,remove the battery to prevent leakage.
1.Touch the power button to turn
the light on and off
2.Touch and Hold the power button
to increase or dim the brightness
Press the Warm/cool button to
select the light’s color temperature
①
+
A A
-
A A
+
A A
③
+
A A
-
A A
+
A A
②
18LEDs Clip-on Music Stand and Reading Light
To Next Page
Need help?
General
