Infortrend DS 3016 - Management Console Connections

2-41EonStor DS 3000 Series Hardware Manual
2.3.7 Management console connections
To connect you SAN storage to external consoles, you need the following:
• DB 9 female to mini-USB cable (bundled with the package)
• CAT 5e LAN cable (user supplied)
Connecting SAN storage to external consoles
See below table for the list of default values of the serial port.
Baud rate 38400
Data bit 8
Parity None
Stop bit 1
Flow control Hardware
NOTES:
• A null modem may be required if you are using a third party cable.
• For TCP/IP connection and rewall conguration, refer to your management software’s online help
or user manual. If your network is not running the DHCP server protocols, you can use the default
IP 10.10.1.1 if you are accessing for the rst time.