Infortrend DS 3024UB - Checking Power Status and Startup Sequence

2-43EonStor DS 3000 Series Hardware Manual
Checking the power status
Once the system is on, no LEDs should light up in red or amber, nor should you hear an alarm from the
system. Start verifying the system status via the following interfaces:
• LCD panel LEDs
Number Name Status
11
Power OFF
11
Host Busy ON
11
Attention OFF
NOTE: When turning ON the DS system, wait for the LCD screen to display READY or No Host LUN.
When the system starts up, the LCD screen displays the following order:
Initializing...
Please Wait...
This displays when the PSUs are turned on.
Power On Self Test
Please Wait...
The system is performing a POST (power on self-test).
Power on
Init Completed...
The system POST is completed.
ES80xx The system is accessing various interfaces.
ES80xx
xGB RAM, Wait...
The system is verifying the installed memory.
ES80xx
The system is now ready. You can start conguring the
system.
ES80xx x
Ready
The system is ready for I/O operation.