Infortrend EonStor DS 1012 - Introduction; Product Overview; Model Naming Conventions

12
Introduction
Product Overview
This manual introduces EonStorDS 1000 systems that support 3Gbps, 6Gbps SAS
or 3Gbps (SATA-II) and 6Gbps (SATA-III) drive interfaces. The 2U/ 3U enclosure is
designed to utilize 2.5” or 3.5” hard drives. Drive capacity can be expanded by
attaching expansion hard drive enclosures (JBODs).
Model Naming Conventions
The naming rules for RAID and JBOD models are explained in the example below:
RAID: DS1016RTB  DS
(A)
+ 20
(B)
+ 24
(C)
+ R
(D)
+ T
(E)
+ B
(F)
Designation Description
(A)
DS = EonStorDS systems
JB = JBOD systems
(B)
10 where 0 indicates first generation, 1 indicates second generation and so on
(C)
12 = 2U system, 12 hard drives capable
16 = 3U system, 16 hard drives capable
24 = 2U / 4U systems, 24 hard drives capable
(D)
R = redundant (dual) controllers
S = single and upgradeable to dual controllers
G = single and NOT upgradeable to dual controllers
(E)
T = Turbo performance (high IOPS)
Standard system CPU if not mentioned
(F)
B = 2.5” hard drive form factor system
3.5” hard drive form factor system if not mentioned