Infortrend EonStor DS 1012 - Replacing the Power Supply Module; Cooling Module; Detecting a Failed PSU

125
Replacing the Power Supply Module / Cooling Module
The power supply units (PSU) are configured in a redundant configuration with each
PSU housed in a robust steel canister.
Detecting a Failed PSU
If a PSU module fails, the system notifies you through the following indicators:
 PSU status LED locations
PSU LED
PSU LED
 Audible alarm (refer to
Audible Alarms)
 Firmware utility (refer to Firmware User Manual in the CD-ROM for
details)
 SANWatch manager software (refer to SANWatch User Manual in the
CD-ROM for details)