Infortrend EonStor DS 1012 - Fault Tolerance for RAID Models

133
Fault Tolerance for RAID models
Drive S.M.A.R.T Support
Yes, with user-configurable detect-only,
clone and replace, and perpetual clone
functions.
CBM (Cache Backup Module)
Yes (R models only, optional accessory
for single controller models)
ISEMS (Infortrend Simple Enclosure Management
Service) via I
2
C interface
Yes
Automatic Drive Failure Detection Yes
Automatic Rebuild on Spare Drives Yes
Regenerate Logical Drive Parity Yes
Bad Block Reassignment Yes
Manual and Automatic Rebuild upon Failed Drive
Replacement
Yes
Manual Clone of Suspected Failed Drive Yes
Concurrent Rebuild on Multiple Drives in a RAID (0 + 1)
Logical Drive
Yes
Salvage the 2
nd
Temporary Failed Drive in a RAID 1, 3, 5
or 6 Logical Drive
Yes
Salvage the 1
st
Temporary Failed Drive in a RAID 0
Logical Drive
Yes