Infortrend EonStor DS 1012 - Page 142

142
2. Install the fixed rack ear mount to the rear posts and secure them using truss head
screws (4)
M5 x 9.0mm
04
3. With the assistance of another person holding the enclosure at the installation height ,
the other person can place four M5 x 25mm (6) at the front of the enclosure and eight
#6-32 screws (3), four on each side, to secure the enclosure into the rack.
3 #6-32
6 M5 x 25mm
6 M5 x 25mm
Front rack post