Infortrend EonStor DS 1012 - Front and Rear Panel Details

17
Chassis
The RAID chassis is a rugged storage chassis divided into front and rear sections.
The chassis is designed to be installed into a rack or cabinet.
Front Panel
1
3
3
4
5
2
 Drive trays (1): Each drive tray is hot-swappable and holds a 3.5-inch
hard drive.
 Status LED Panel (2): The panel has Service / Power / Cooling Fan /
Thermal / System LEDs.
 Handles (3): There are handles on both sides of the enclosure for users
to pull / push the enclosure out and into the cabinet when the enclosure
is installed on a slide rail rackmount system.
 Rotary ID switch in JBOD systems or power button (4): The rotary
ID switch is for users to set a unique ID to each JBOD when connected
in a multi-array environment; or it may be a power button for some RAID
systems.
 Mute / Service button (5): The mute button is to mute an alarm or to
indicate to the administrator the system requires service.