EonStor / EonStor DS S12/S16/S24 Series
124
Single-Controller with Trunk
CH0 ID0 CH0 ID1
123456
789101112
B
12x
6x
8x
2x
9x
3x
10x
4x
11x
5x
7x
1x
Ethernet
12x
6x
8x
2x
9x
3x
10x
4x
11x
5x
7x
1x
C
LD
LV
LV
LD
HBA 1
HBA 0
HBA 1
HBA 0
EonPath
EonPath
VLAN1 VLAN2
CH1 ID0 CH1 ID1
CH0 ID0
CH0 ID1
CH0 ID0
CH0 ID1
CH1 ID0
CH1 ID1
CH1 ID0
CH1 ID1
RAID + JBOD
Component Description
RAID system
iSCSI RAID managed by a single controller, with 4 host
ports.
HBA or NIC
iSCSI initiators, preferably PCI-E TCP/IP offload engine
(TOE) capable cards.
GbE cables
GbE network cables; port-trunking indicated by the red
circles.
Software
EonPath to manage the fault-tolerant paths with
failover/failback and load balance.
RAID
configuration
4 logical partitions (created from 2 logical volumes)
2 Logical Volumes (each contains a logical drive)
2 Logical Drives
* Each logical partition appears on two different host
links for the purpose of fault tolerance. Use EonPath
multi-pathing software so that your operating system can
identify alternate paths to the same logical drive.
100