Infortrend S12 Series - System Maintenance; Replaceable Components Overview

EonStor / EonStor DS S12/S16/S24 Series
4
System Maintenance
WARNING
Do not remove a failed component from the system until you have a replacement on
hand. If you remove a failed component without immediate replacement, it will
disrupt the internal airflow.
Qualified engineers who are familiar with the system should be the only ones who
make component replacements.
Whe e. Forcing or n inserting a removable module, do not use excessive forc
slamming a module can damage the connector pins either on the module itself or on
the backplane.
The following components can be replaced:
 Controller module (please refer to Replacing the Controller Module
)
 Memory module (please refer to Replacing the Memory Module for
RAID Models)
 CBM module (please refer to Replacing the CBM for RAID Models
)
 PSU module (please refer to Replacing the Power Supply Module
)
Replacing the Hard Disk Drive Hard drive (please refer to
)
142