Infortrend S12 Series - Replacing a Cooling Module

EonStor / EonStor DS S12/S16/S24 Series
160
42
Re

Cooling module status LED locations (blue circles)
placing a Cooling Module
If a cooling module fails, the system notifies you through the following indicators:
2U-Rxxxx & 3U
Be sure ever y PSU should
have the same ma rk
3Y
40 5W
Be sure every PSU should
have the same mark
3Y
40 5W
Be sure ev ery PSU sh ould
have th e same mark
3Y
40 5W
CH0 CH1
CH0 CH1
4U
2UL-C
2UL
 Audible alarm (refer to Audible Alarms
)
 Firmware utility (refer to Firmware User Manual in the CD-ROM for
details)
 SANWatch manager software (refer to SANWatch User Manual in the
CD-ROM for details).