Infortrend S12 Series - Replacing a Hard Drive

EonStor / EonStor DS S12/S16/S24 Series
43
Replacing a Hard Drive
WARNING
Keep t on hand before replacing the hard drive. Do not leave the drive a replacemen
tray open for an extended period of time or the internal airflow will be disrupted.
Handle the hard drives with extreme care. Carry them only by the edges and avoid
touching their circuits part and interface connectors.
To replace a hard drive, follow these steps.
1. Identify the drive tray. Use the firmware utility, SANWatch, or the LED on the
drive tray to identify faulty hard drive(s). The drive bays are numbered from left to
right and from top to bottom.
2U
3
7
11
4
8
12
11
5
9
2
6
10
3U
11 2 43
5 6 8
7
11 129 10
13
14 15 16
4U
11
5
9
2
6
1
3
7
4
8
0 11 12
17
13
21
18
14
22
19
15
20
16
23 24
163