EonStor / EonStor DS S12/S16/S24 Series
System mode
l numbers with a designated āNā are powered by DC PSUs.
The kit is for DC PSU systems only and the earth lead kit MUST be installed before
. The earth lead cable, dedicated screws and cage nut can
be found in the accessory box. It is recommended to install the earth lead kit once
the enclosure stalled into the cabinet.
To install, att d cable to the enclosure and secure it with
the dedic
you power on your system
has been in
ach one end of the earth lea
ated screw as shown in the illustration below:
Attach the other end of the earth lead cable to
the cabinet rack post with the dedicated screw.
If you st does not come with
ed to
secure it to the rack post.
r cabinet rack po
screw threads, use the cage nut provid
189
To Next Page
Loading...
