Slide Rail Installation Guide
50
Enclosure Installation Prerequisites
To ensure proper installation and functionality of the RAID system, please observe the
following warnings:
all compo ents have been received against the “Unpacking List”. Contact
r immediately if anything is missing
Install the enclosure as-is out of the packaging; install hard drives and optional
modules (FBM and / or BBU) after the enclosure has been mounted
nti-static wristband before nd during the installation procedure
d to plug the system into two different po er sources (eg. into a
et and another into a UPS
Ensure the rack whic the enclosure is mounted onto has proper grounding and
over-current protection
Do not obstruct ventilation openings; provide 20cm of free space at the front and back
of the enclosure for air circulation; keep the ambient temperature below 35 degree
Celsius
Cross check n
your vendo
Wear an a a
It is recommende w
power outl )
h
193
To Next Page
Loading...
