IFT-9373CSlider36 Slide Rail Kit
215
191
Removing the Enclosure
*Prior to removing the enclosure, power down your system (stop all I/O actions, please
refer to Users’ manual) and all hard drives have been removed!
*It is strongly recommended that two people work together on this procedure
1. Remove the screws from both sides of the enclosure’s ears (Shown above in step 8)
2. Pull the enclosure out until it is stopped by the release latch
3. Use both hands to support the enclosure weight and use your index finger to press
and pull the release latches (indicated by the small blue arrow) towards you. The
larger blue arrow indicates the direction the enclosure should be pulled towards.
4. With another person’s help, slowly pull the enclosure out of the rack once it has been
released.
To Next Page
Loading...
